Free shipping on all orders over $500

Flat rate $9 shipping on all orders under $500

Z-Locker Controller (Jeep Gladiator / Wrangler Jl)

$177.00 USD
Z Automotive  |  SKU / Part Number: TAZ698

Optional extension harness

Free Canada Wide Shipping
Free shipping on all orders over $500

Installing Yourself?

 

Z-Locker is a simple adapter to plugin using your factory Rubicon harness to your aftermarket E-Lockers or Air Lockers.

Using watertight connectors and a potted design, and automotive-grade internal components, these are made to last in the harsh Jeep undercarriage environment.

One end of the adapter plugs into the 4 pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied.  The other end is a 2 pin connector which will output 12 Volts to engage your E-Locker or Air Locker solenoid.

Retain the factory locker switches, dash messages, warnings and will even set off the “service locker” message if your aftermarket locker is faulty or gets disconnected.

If you have a Tazer JL Mini (or Tazer JL), you can use the lockers at your command in 4Hi and 2WD modes as well.

The output connector is an industry-standard part that will plug into most E-Lockers.  Use our optional Locker extension if you have a different mating connector or need to run the wires longer – usually needed for Air Locker installations.  This gives a total reach from the factory locker location of over 7 1/2 feet.

 

Z-Locker Extension Harness

If using air lockers, you may need to add an extension harness

 

Jeep Gladiator 2020 - 2023
Jeep Wrangler 2018 - 2023

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Z Automotive

    Z-Locker Controller (Jeep Gladiator / Wrangler Jl)

    From $177.00 USD

     

    Z-Locker is a simple adapter to plugin using your factory Rubicon harness to your aftermarket E-Lockers or Air Lockers.

    Using watertight connectors and a potted design, and automotive-grade internal components, these are made to last in the harsh Jeep undercarriage environment.

    One end of the adapter plugs into the 4 pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied.  The other end is a 2 pin connector which will output 12 Volts to engage your E-Locker or Air Locker solenoid.

    Retain the factory locker switches, dash messages, warnings and will even set off the “service locker” message if your aftermarket locker is faulty or gets disconnected.

    If you have a Tazer JL Mini (or Tazer JL), you can use the lockers at your command in 4Hi and 2WD modes as well.

    The output connector is an industry-standard part that will plug into most E-Lockers.  Use our optional Locker extension if you have a different mating connector or need to run the wires longer – usually needed for Air Locker installations.  This gives a total reach from the factory locker location of over 7 1/2 feet.

     

    Z-Locker Extension Harness

    If using air lockers, you may need to add an extension harness

     

    Jeep Gladiator 2020 - 2023
    Jeep Wrangler 2018 - 2023

    Optional extension harness

    • No extension harness
    • Add extension harness
    View product