Bi-Xenon Hid Adapter 9007/9004/9003/H4/H13

PRODUCT DETAILS

COMPATIBILITY: When installing HIDs in a dual-filament application, the original factory power signal must be separated into main power for the ballast, and a high beam signal to trigger the bixenon bulb, switching from low beam to high beam. Normally, this is accomplished with a bixenon relay, which connects to the battery and runs to each headlight. However, these can be unreliable as the relay fails over time, and can be cumbersome to install.

FLEXIBLE: These bixenon adapters are a modern, reliable alternative to the traditional wire harness relay. They do not require extra wiring- it's just an adapter! Plug one side into your factory bulb socket, then plug the other side into your HID ballast and bixenon HID bulb. The adapter will power the ballast, and quickly change from low to high beam when you flip the switch in your vehicle.

RUGGED: These adapters are fully encapsulated for maximum reliability, and are compatible with all 35W CAN-BUS HID ballasts. Select the size based on the input power signal- H4/9003, H13, 9004, or 9007. The output wires are standard 9006 power to plug into the ballast, and a rectangular 2-pin standard high beam solenoid connector.

PLUG-N-PLAY: Forget about crimp-on wire taps, these convenient "Y" pigtails make splitting or doubling the signals from your headlight system easy and clean.

TRUSTED: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that ESSK carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us

PRODUCT SPECS
WHAT'S INCLUDED
*QUANTITY: x2 Bi-Xenon adapters
*WARRANTY: 2 Years
COMPATIBILITY
*VEHICLES: All w/ 9007/9004/9003/H4/H13                                                                *BALLASTS: 35W only
TECH SPECS
*MAX LOAD: 15A @ 12V DC
*WIRE THICKNESS: 16 AWG
*LENGTH: Approx. 210mm
*INSULATION: Thermal conformal coating