Installation Tools
- Pry Tool
- T30 Torx Bit
- 5/32 Allen
- Drill w/ Step Bit
- Flat Head Screwdriver
Installation Instructions
Step 1 - Remove Factory Bed Light
Remove the LH bed light by applying forward pressure and leveraging the assembly outward.
Step 2 - Unplug Harness
Disconnect the assembly from the OE harness by depressing the lock and separating it.
Step 3 - Remove T30 Screws
Use a T30 to remove the (5) five screws holding on the cargo rail (circled in red below).