WE STAND IN SUPPORT OF OUR TRUCK DRIVERS ~ SHIPPING DELAYS ARE EXPECTED THIS WEEK
Part #: 1 × LF271
Just when you think: You've done your research and come across every last option in the 7" round LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a 7" round platform; Morimoto's Sealed7 2.0 pulls it off in the most functional and attractive setup we've seen to date.
Honestly: Here at ESSK, we've seen em all and believe that the Sealed7 2.0 is the best new entry in the 7" round market for a variety of reasons, which we'll outline below.
Proprietary: The Morimoto Sealed7 2.0 is all-new, all-original from the ground up. Until now, there were basically three distinct products on the market. You have the real-deal J.W. Speaker, at the top of the totem poll. Then you have the cheap J.W. Speaker knock-offs, re-branded by companies A,B, and C, and then you have the Truck-Lite reflector-based 7" lights...again, re-branded by company X,Y, and Z. These are unlike anything else on the market.
Output: In low beam mode, Nichia NCSW170C Series LED's paired with Morimoto's advanced Kuria Optic projector lens array efficiently distributes roughly 3000 lumens on the road in a properly LHD-stepped beam pattern. Because the Sealed7 runs a "dual-burn" setup on high beam mode, the output is intensified to nearly 4000 mosquito-melting lumens there.
DRL / Switchback: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white daytime running light (with low beams on) and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy.
Quality: No expense was spared when designing the Sealed7. Start with the ingredients at the heart of the headlight from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. The UV coated Polycarbonate lens is shatter proof and will take years of abuse without fading. You can feel the precision in the heavy-duty die-cast housings that double as a heat-sink are no deeper than most traditional 7" PAR56 headlights. A special PWM LED driver resides inside of the headlight to keep the LED's running at their peak intensity, even during prolonged periods of use.
7" Standard: Designed to replace all 7" round / PAR56 headlights, the Sealed7 offers full low and high beam functionality. They come standard with H13/9008 male inputs, tailored for use on a newer Jeep Wrangler - but can easily use an H4 adapter to go old school.
TRUSTED: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that ESSK carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
HEADLIGHTS: 2x (One Pair) Sealed7 2.0 Bi-LED Headlights
WIRING: Delphi H13 Input, T-Taps (for DRL / Turn Signal)
WARRANTY: 5 Years (Click for Details)
JEEP WRANGLER JK: 2007-2018 (US Models Only)
INPUT: Delphi H13 w/ Anti-Flicker Harnesses
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.
INTENSITY: 2, 860lm (Low), 1, 020lm (High)
POWER: 27w (Low), 12w (High)
INPUT: Delphi H13 w/ T-Taps for DRL
INPUT VOLTAGE: 9-36V DC
TRAFFIC PATTERN: LHD / DOT
MATERIAL: Powdercoated Cast Aluminum (Housing), UV-Treated Polycarbonate (Lens)
LIGHT SOURCE: Nichia NCSW170C, Philips Luxeon 3535L