Upgrading your vehicle's lighting with Diode Dynamics LED bulbs is a quick and effective way to improve brightness, reliability, and efficiency. Designed for 12V automotive applications, these LED bulbs are a direct replacement for factory-installed incandescent bulbs. Here's the simple install walkthrough.
Table of Contents
- Tools Required
- Installation Instructions
- Questions About the Install?
- Shop LED Bulbs at Ess K Customs
Tools Required
- Vehicle owner's manual
- Basic hand tools (as required to access the bulb location)
- Clean gloves (recommended)
Time Required: Approximately 5–15 minutes per bulb.
Installation Instructions
Step 1 — Refer to your vehicle's owner's manual for instructions on accessing the bulb you're replacing. This may require removing an interior panel, lens, or trim piece depending on the application.
Step 2 — Unplug the factory-installed incandescent bulb from its socket and carefully remove it from the vehicle.
Step 3 — Insert the new Diode Dynamics LED bulb into the socket, making sure it's fully seated and making proper contact.
Step 4 — Before reassembling any panels, turn on the vehicle or activate the corresponding light to confirm the LED bulb illuminates properly.
Step 5 — Once proper operation is confirmed, reinstall any panels, lenses, or trim pieces that were removed during access.
Step 6 (Troubleshooting) — If the bulb doesn't light up, remove it, rotate it 180 degrees, and reinstall. Make sure the bulb is making full contact in the socket by adjusting the metal pins on the bulb or socket if necessary.
Questions About the Install?
If you run into any issues during the installation, contact Ess K Customs — as an authorized Diode Dynamics dealer, we're here to help.
Shop LED Bulbs at Ess K Customs
Looking for LED bulb upgrades for your vehicle? As an authorized Diode Dynamics dealer, Ess K Customs carries the full lineup of LED replacement bulbs — interior, exterior, and auxiliary — with full manufacturer warranty.
Browse All Diode Dynamics LED Bulbs at Ess K Customs →
This install guide applies broadly to Diode Dynamics LED replacement bulbs.