Free shipping on all orders over $500

Flat rate $15 shipping on all orders under $500

We've switched all Canada Post shipping to Purolator, Fedex and UPS

HD LED Switchback Halos (Pair)

$ 120.00 CAD
Diode Dynamics  |  SKU / Part Number: DD2059
Ring Diameter

Free Canada Wide Shipping
Free shipping on all orders over $500

Found A Lower Price?
We price match or beat most competitors!

WHAT'S INCLUDED

In the Box:
Two (2) LED halo rings
Two (2) waterproof drivers
Two (2) input wire pigtails
Eight (8) T-tap connectors
Installation guide

3 Year Warranty

COMPATIBILITY

Universal

TECH SPECS

Color Temp (CCT): 6000K
Operating Voltage: 9-16V
Operating Temperature: -40C to 85C (-40F to 185F)
Connector(s): JST Inline Connectors, T-Tap Inputs
Driver Dimensions: 2.5" x 1.38" x 0.88"

KIT COMPONENTS AND PART NUMBERS

  • DD2058 Halo 50mm Switchback (pair) 1.28 lbs AC0026 Switchback Driver Type SC Low
  • DD2059 Halo 60mm Switchback (pair) 1.28 lbs AC0027 Switchback Driver Type SD Low
  • DD2060 Halo 70mm Switchback (pair) 1.28 lbs AC0028 Switchback Driver Type SE Low
  • DD2061 Halo 80mm Switchback (pair) 1.28 lbs AC0028 Switchback Driver Type SE Low
  • DD2062 Halo 90mm Switchback (pair) 1.28 lbs AC0029 Switchback Driver Type SF Low
  • DD2063 Halo 100mm Switchback (pair) 1.28 lbs AC0029 Switchback Driver Type SF Low
  • DD2064 Halo 110mm Switchback (pair) 1.28 lbs AC0030 Switchback Driver Type SG Low
  • DD2065 Halo 120mm Switchback (pair) 1.28 lbs AC0030 Switchback Driver Type SG Low
  • DD2066 Halo 130mm Switchback (pair) 1.47 lbs AC0031 Switchback Driver Type SH Low
  • DD2067 Halo 140mm Switchback (pair) 1.47 lbs AC0031 Switchback Driver Type SH Low
  • DD2068 Halo 150mm Switchback (pair) 1.47 lbs AC0031 Switchback Driver Type SH Low
  • DD2069 Halo 160mm Switchback (pair) 1.47 lbs AC0031 Switchback Driver Type SH Low
  • DD2241 Halo 185mm Switchback (pair) 1.67 lbs AC0031 Switchback Driver Type SH Low

Installing Yourself?

Click here for the PDF install guide

HDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.

Sizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.

Mounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20% of the halo can be removed using side-cutting snips and still remain fully functional. Click here to learn more: Cutting HD Halos and Strip video.

Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.

PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:

White: White Low Power, 50% brightness
Red: White High Power, 100% brightness
Yellow: Amber Signal, double brightness, flashing (dims if powered more than two seconds)
Black: Ground

All input wires activate the halos, at different brightness levels. All switchback halos ship with "low" priority drivers. This means that if both "low" and "high" power inputs are powered, the LED will light up in white, with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.


All input wires activate the halos, at different brightness levels. All switchback halos ship with "low" priority drivers. This means that if both "low" and "high" power inputs are powered, the LED will light up in white, with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.

This entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)